邮箱：510406164@qq.com惠州市众佳电子有限公司
Huizhou Zhongjia Electronics Co., Ltd.
众佳电子
全国服务热线
13714669926
全国服务热线
13714669926Product Center
服务热线
15814620810
·Rated power: 120W
·Resistance range: 0.01~2700
·Maximum accuracy: ± 5%
·Resistance technology: wire wound resistance
·Packaging material: Industrial 6063 aluminum material
·Packaging method: sand mold filling
·Installation method: fixed with screws
·Working temperature range: -55 ℃~275 ℃
·Dimensions: L=122mm, W=42mm, H=21mm
Application areas: servo frequency conversion, robot industry
■ Product features
Adopting high heat dissipation aluminum shell, filled with high insulation and non combustible filling material, it is extremely easy to dissipate heat; Has vibration resistance, weather resistance, and long-term stability; High power, small size, easy installation, and beautiful appearance.
■ Specifications, dimensions, and technical specifications
◆ Specifications, dimensions, and units of measurement: mm
|
model |
At 25 ℃ |
Dimensions (mm) |
||||||
|
L1±1.5 |
L2±1.5 |
L3±1.5 |
L4±0.5 |
B±1 |
H±1 |
D±0.5 |
||
|
RXC120 |
120 |
122 |
140 |
130 |
5.5 |
42 |
21 |
5.5 |
*Note: The dimensions are for reference only. Specific dimensions and selection need to be consulted
◆ Electrical parameters
|
model |
Rated power at 25 ℃ (W) |
Resistance range (Ω) |
Accuracy deviation (±%) |
|
RXC120 |
120 |
0.1－2700 |
±5 |
■ Product power consumption reduction curve chart
Customer selection, for exampleRXC 60W 10 Ω± 5%, model: RXC-60-10RJ-L; Low inductance, add the letter N to the model, for example: N RXC-60-10RJ
|
RXC |
60 |
10R |
J |
L |
|
code |
Rated power |
Resistance value |
accuracy |
Installation method |
|
RXC series (boat shaped aluminum shell) |
50=50W 100=100W |
0R1=0.1Ω 100R=100Ω |
F=±1% G=±2% H=±2% J=±5% K=±10% |
T=Terminal L=Introduction |
■ Suggestions for using resistors
It is best to leave 1.5 times the power margin for resistors in circuits. For example, if the voltage in the circuit is 100V and the current is 0.01A, the calculated power is P=100 * 0.01=1W. At this time, a resistor of 1W cannot be used, and 1 * 1.5=1.5W is calculated. If there is no 1.5W resistor, a resistor of 2W is needed.
